DIAPHRAGM MATERIAL

316 L stainless steel

Shell material

316 L stainless steel

Pin leads

Gold plated Kovar/100mm silicone rubber lead

Back pressure tube

316L stainless steel (gauge pressure and negative pressure only)

sealing ring

Nitrile rubber

Electrical characteristics

power supply

≤2.0mADC

Input impedance

2.8kΩ~5 kΩ

Output Impedance

2.8kΩ~5 kΩ

response time

(10%～90%)：<1ms  

insulation resistance

100MΩ, 100V DC

Allow overvoltage

2 times full range or 110MPa (minimum), with an overpressure of 5 times for 0B/0A/02

environmental condition

Media applicability

Non corrosive fluids for 316L stainless steel and nitrile rubber

vibrate

No change at 10gRMS, (20-2000) Hz

impact

100g，11ms

position effect

Deviation of 90 ° in any direction, zero point change ≤± 0.05% FS

Benchmark conditions

ambient temperature

（25±1）℃

  humidity

（50%±10%）RH

  atmospheric pressure

(86~106) kPa

power supply

（1.5±0.0015）mA  DC

All tests were conducted in accordance with relevant national standards, including GB/T2423-2008, GB/T8170-2008, GJB150.17A-2009, etc., and also comply with the relevant content specified in our company's "Enterprise Standard for Pressure Sensors".